Myri-10G and Myrinet-2000 Switch Software

Myri-10G and Myrinet-2000 Switch Software

To download Myrinet software, you need a login and password.
If you don't already have these, please request them.

Myri-10G and Myrinet-2000 Switch Firmware and Documentation

10G-{21U,12U,7U}-{CLOS,EDGE}-ENCL switch specifications and documentation are in preparation.
To configure the 10G-MONITOR-B monitoring line card in the 10G-{21U,12U,7U}-CLOS-ENCL switch, refer to the following FAQ entry.
To update the Linux-based switch firmware (fridgefs.img) for the 10G-{21U,12U,7U}-CLOS-ENCL switch, refer to the following FAQ entry.
Refer to the Myri-10G Product List and Prices for specifications and documentation for the 10G-CLOS-ENCL switches.
A tutorial for the web interface and TFT color display of the 10G-CLOS-ENCL switch is available and contains installation instructions for upgrading the monitoring line card firmware (shipfs.img).
To update the Linux-based switch firmware (shipfs.img) for the 10G-CLOS-ENCL switch, refer to the following FAQ entry.
To walk the SNMP MIB, refer to the following FAQ entry.

Refer to the Specifications Index for Myrinet-2000 Switches for Large Clusters for documentation on these switches.
A tutorial for the web interface and TFT color display of these switches is available and contains installation instructions for upgrading the monitoring line card firmware (shipfs.img).
To update the Linux-based switch firmware (shipfs.img) for the Clos256 switches (M3-CLOS-ENCL/M3-CLOS-ENCL-B and/or M3-SPINE-ENCL/M3-SPINE-ENCL-B), refer to the following FAQ entry.
To walk the SNMP MIB, refer to the following FAQ entry.

Refer to the Guide to Myrinet-2000 Switches and Switch Networks for documentation on the M3-E16, M3-E32, M3-E32, M3-E64, and M3-E128 switches.
For tools, documentation, and the SNMP MIB for Myrinet-2000 (M3, 3rd generation) switches (M3-E16, M3-E32, M3-E64, M3-E128), as well as the latest monitoring line card firmware, download m3-dist.tar.gz release-1.0.15.
- To update the VxWorks-based switch firmware for the M3-E* switches, refer to the following FAQ entry.
- m3-dist.tar.gz, version 1.0.14 or later is required for use with gm-2.0.9 and later.
- m3-dist.tar.gz, version 1.0.13 or later is required for use with the M3-SW16-8E line cards.
- If you're using GM-1 with m3-dist.tar.gz, version 1.0.14 or later, refer to this FAQ entry for details.

The software for the previous generation of 16-port Myrinet-1280 (M2, 2nd generation Myrinet) switches is elsewhere.

Last updated: 19 June 2008