These industry-standard SFP+ (Small Form factor Pluggable 10.3125 GBaud) optical-fiber transceivers are supplied to Myricom from multiple sources. Myricom has qualified the transceivers from each source for performance and reliability. Some of the SFP+ transceivers supplied by Myricom have Myricom labeling, as shown, and some have the manufacturers' standard labeling.

Consistent with the original SFP multi-source agreement (MSA), these hot-pluggable transceivers have a common mechanical specification, pinout, and management interface, and connect to duplex serial fiber with "LC" connectors.

The 10GBase-SR transceivers operate at an 850nm optical wavelength, and are designed for 50µm (50/125) multimode fiber at distances of 26-82m depending upon the fiber, or at distances up to 300m over 50µm 2000MHz·km multimode fiber.

The 10GBase-LR transceivers operate at a 1310nm optical wavelength, and are designed for 9µm (9/125) single-mode fiber up to 10km, but are commonly used up to larger distances with high-quality fiber.

Laser Safety: Both the 10GBase-SR and 10GBase-LR SFP+ transceivers are Class 1 Laser Products (no biological hazard).

Power: Less than 1W typical.

Temperature Limits: Operating: 0C to 70C case temperature. Storage: -40C to 85C.

Weight: 20g (0.044 lb).

Reduction of Hazardous Substances: These devices are RoHS-compliant lead-free (RoHS-6).

10G-SFP-SR and 10G-SFP-LR transceivers

Last significant revision: 27 August 2009