Myricom 10G-MONITOR-B Specifications

10G-MONITOR-B Line Card

The 10G-MONITOR-B is used in slot M of the 10G-21U-CLOS-ENCL, 10G-21U-EDGE-ENCL, 10G-12U-CLOS-ENCL, 10G-12U-EDGE-ENCL, 10G-7U-CLOS-ENCL, and 10G-7U-EDGE-ENCL enclosures. The 4 alignment pins for insertion into the enclosure backplanes are keyed to allow use of this line card only in these slots.

Specifications:

Main Microcomputer: A PowerPC microcomputer with RAM and flash memory communicates via the front-panel ethernet ports and via individual serial links with small microcontrollers on port line cards, on the monitoring and control boards on the 10G-FAN-B units, on the power board within the enclosure, and on the monitoring line card itself. The standard firmware runs under Linux, and provides a web server and other interfaces described elsewhere.

Front-panel ports: Dual 10/100/1000Base-T ports. The Ethernet MAC address is shown on a label on the front panel. Each RJ-45 Ethernet port has two green LEDs: the left or "link" LED indicates that the port is connected to another active Ethernet port, and the right LED indicates packet traffic.

Backplane ports: The 10G-MONITOR-B does not have any connections to 10Gb Myrinet links on the backplane. It connects only to serial links that carry monitoring and control information.

Small-microcontroller functions: Self-test, board identification, voltage monitoring, temperature monitoring upstream & downstream in the air flow, and relative humidity sensing. The small µC will shut off the line-card power except for the µC section on over-temperature (greater than 55C) or other fault conditions.

Status LED: Located in the middle of the front panel: Off: not operating. Flashing Green: Initializing. Green: operating. Yellow: fault.

Power requirements: +12V input power from the backplane power connector. Maximum power used is 10W (0.8A @ 12V). The line card is hot-swappable.

Physical characteristics: Width is ~17 inches (432mm); depth is ~14 inches (356mm); height at the front panel is 0.8 inches (20.3mm). Weight 0.8kg (1.8 pounds).

Environmental: Operating: Temperature 0C to 55C up to 10,000 foot altitude. Relative humidity 15% to 80% @ 50C, non-condensing. Storage: Temperature -40C to 70C. Relative humidity 90% @ 65C.

Regulatory Approvals: Fully compliant with EN55024 (1998 w/A1: 2001 & A2: 2003), EN55022 (1998) Class A, AS/NZS 3548 (1005 W/A1 & A2: 97) Class A, CISPR 22 (1997) Class A, FCC Part 15 Subpart B Section 15.109 Class A, VCCI (April 2000) Class A, & ICES-003 Class A (ANSI C63.4 1992). See the Index of Myri-10G Regulatory Reports.

Reduction of Hazardous Substances: This product is RoHS-compliant under the server exemption.