Front-panel network ports: none

Backplane ports: 64 Myrinet-protocol XAUI ports to the backplane.

Switch: Two Myri-10G XBar32 32-port switches with 110ns path-formation latency. All 64 ports connect to the backplane.

Microcontroller functions: Self-test, board identification, voltage monitoring, temperature monitoring upstream & downstream in the air flow, and XBar32 scan path functions including port status, packet counts, and error counts. All status information is reported on demand through the serial link to a 10G-MONITOR-B monitoring line card. The µC will shut off the line-card power except for the µC section on over-temperature (greater than 55C) or other fault conditions.

Status LED: Located in the middle of the front panel: Off: not operating. Flashing Green: Initializing. Green: operating. Yellow: fault.

Power requirements: +12V input power from the backplane power connector. Maximum power used is 25W (2.1A @ 12V). The line card is hot-swappable.

Physical characteristics: Width is ~17 inches (432mm); depth is ~14 inches (356mm); height at the front panel is 0.8 inches (20.3mm). Weight 0.9kg (2 pounds).

Environmental: Operating: Temperature 0C to 55C up to 10,000 foot altitude. Relative humidity 15% to 80% @ 50C, non-condensing. Storage: Temperature -40C to 70C. Relative humidity 90% @ 65C.

Regulatory Approvals: Fully compliant with EN55024 (1998 w/A1: 2001 & A2: 2003), EN55022 (1998) Class A, AS/NZS 3548 (1005 W/A1 & A2: 97) Class A, CISPR 22 (1997) Class A, FCC Part 15 Subpart B Section 15.109 Class A, VCCI (April 2000) Class A, & ICES-003 Class A (ANSI C63.4 1992). See the Index of Myri-10G Regulatory Reports.

Reduction of Hazardous Substances: This product is RoHS-compliant under the server exemption.

Last significant revision: 7 July 2008